Air liquide medical syst. srl Perfecta Kit With Mefar 2000 Ampoule

Reviews | PERFECTA KIT WITH MEFAR2000 AMPULA Class IIa medical device. | Kit consisting of: a Mefar2000 ampoule (lower body, pisper, upper body) and una Volumetric mask with connector and exhaust valve. | The Mefar2000 nebulizer bulb with volumetric mask can be used to treat bronchial asthma, chronic bronchitis, pulmonary emphysema, cystic fibrosis, and other respiratory diseases through the administration of medications in aerosol form. The bulb is incompatible with solutions containing menthol (eucalyptus, essential oils). | | Directions for use | To avoid the risk of microbial contamination, the components must be essere cleaned and disinfected after each therapy and before use, carefully following the instructions listed. | Cleaning | The Mefar2000 ampoule and the volumetric mask with connector must essere Wash with hot water using a little non-abrasive detergent and rinse under running water. Once all the parts have been cleaned, they can essere dry with a soft cloth or a hair dryer then they can essere answers. | Disinfection | The Mefar2000 ampoule and the volumetric mask with connector, after essere washed states can essere immersed in una cold disinfectant solution (such as a 5.25% sodium hypochlorite solution), following the manufacturer's instructions (be careful to read the warnings and ensure that the disinfectant solution is compatible with the material the kit is made of). The kit components, except for the tube end, can be disinfected by boiling them in water for 10 minutes. | Sterilization | Sterilization is possible for the kit components, except for the tube end, in an autoclave at 121°C for a tempo of 15 min. (preferably not to exceed 30 min.). | | Technical Specifications | Minimum supply pressure: 1.5 bar (150 kPa) Maximum supply pressure: 3 bar (300 kPa) Air flow at minimum pressure: 7 l/min Air flow at maximum pressure: 15 l/min Drug delivery at minimum pressure: 0.20 ml/min Drug delivery at maximum pressure: 0.45 ml/min MMAD at minimum pressure: 2.5 µm MMAD at maximum pressure: 1.9 µm Maximum capacity: 8 ml. | | Components | Lower body, pisper, upper body: Polycarbonate. | Mask and exhaust valve: Silicone. | Connection: Polycarbonate. | | Format | 1 piece. | | Code 471149